Industrial 110v - 230v Self-Priming Jet Water Pump CAM80
In stock
SKU
10-0301
£626.98
Industrial-strength 110v - 230v water pump with a very high hydraulic performance. Suitable for commercial rainwater harvesting systems or medium to large domestic gardens. TEST ALL STORES
This industrial, self-priming 110v to 230v water pump operates on single phase 240V power supply and can be connected via a standard 3 pin plug with suitable fuse - a good choice when intermittant use means the pump will be stationary for long periods of time. Suitable for commercial rainwater harvesting systems or medium to large domestic gardens.
- The Gm80 is a single stage, self-priming 'jet' pump
- with a 304 stainless steel body and impeller.
- Motor supports are in aluminum, with venturis in thermoplastic.
- It has a stainless steel shaft fitted with a carbon ceramic and NBR mechanical seal and IP44 motor.
- Single phase motors incorporate an overload protection device.
- Designed for pumping clean water only at maximum temperature of 35ºC and should not be allowed to run dry.
- Inlet (BSPF) 1”
- Outlet (BSPF) 1”
- KW 0.60
- Volt 110.230
- Flow (l/min) 55
- Head (mtrs) 38
- W x l x h (mm) 166 x 320 x 180
- Dry weight (kgs) 6.10
- Packing weight (kgs) 6.60f
| Approx. Delivery Time | 3-5 Days |
|---|---|
| Colour | Blue |
| Refill Pack Size | Pack of 1 |
| Height (CM) | 18 |
| Width (CM) | 16.6 |
| Depth (CM) | 32 |
| Weight (KG) | 6.6 |
| Voltage (Kw) | 240 |
| Guarantee (Years) | 1 |